Mitered Pipe Bend

Emcor stuff (17)

Mitered Pipe Bend

A Mitered bend, often referred to as a Miter Elbow or Bend, is created by cutting pipe ends at an angle and then connecting them. This method is utilized to mitigate reflections in piping systems. In a 4-piece Miter bend, there are two end gores and two middle gores, which are the individual miter pieces. Mitered bends help reduce capacitance, restoring the line to its original characteristic impedance. The calculator provided below aids in determining the dimensions of the miter bend. Miter elbows are manufactured by fabricating several pipe cut pieces, which involve multiple weld joints. Therefore, it is crucial for design engineers to carefully plan the design, as an excessive number of weld joints can weaken the components, while too few weld joints can result in higher pressure drops.

Emcor Engineering delivers an exceptional customer experience through its extensive product range and a dedicated and customer-focused team. We offer a variety of materials, including Stainless Steel, Carbon Steel, Alloy Steel, Duplex Steel, Super Duplex Steel, Nickel Alloy 200, Monel, Copper Nickel, and Hastelloy, in various forms. Our Mitered Bends are designed for easy conveyance, handling, and reliability, boasting excellent surface finishes and crafted from top-notch raw materials. These Mitered Bends are available in a range of sizes and shapes, tailored to meet our clients’ specifications, all offered at highly competitive prices.

CARBON STEEL SPECIFICATIONS:

  •  Size : 1/2″ to 80″NB , ANSI/ASME B 16.9
  •  Schedule : 10/20/40/80/100/120/160/XXS
  •  Carbon Steel : ASTM A 234 WPB, IS 1239 PART II
  •  Carbon Steel : DIN Standard – EN 10253-2 – P235TR2/P265TR2/P235GH/P265GH/P355N/P355NH
  •  Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE

ALLOY STEEL, & LTCS SPECIFICATIONS:

  •  Alloy Steel : ASTM A 234, WP5, WP9, WP11, WP12, WP91
  •  Low Temp. CS : ASTM A-420 WPL6
  •  Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE

STAINLESS STEEL SPECIFICATIONS:

  •  Size : 1/2″ to 80″NB, ANSI/ASME B 16.9
  •  Schedule : 10/20/40/80/100/120/160/XXS
  •  Stainless Steel : ASTM A 403 WP – TP                                                                                                          304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904L / XM19
  • Stainless Steel : DIN Standard EN 10253-4 / 10222-5 1.4301/1.4307/1.4401/1.4404/1.4529/1.4571/1.4541/1.4410/1.4550/1.4335/1.4539

DUPLEX STEEL & COPPER NICKEL SPECIFICATIONS:

  •  Size : 1/2″ to 48″NB , ANSI/ASME B 16.9
  •  Schedule :10/20/40/80/100/120/160/XXS
  •  Duplex Steel : ASTM A815- UNS S31803, S32205, S32750, S32760
  •  Copper Nickel : C70600(90:10), C71500(70:30), C71640

NICKEL ALLOYS SPECIFICATIONS:

  •  Size : 1/2″ to 48″NB , ANSI/ASME B 16.9
  •  Schedule :10/20/40/80/100/120/160/XXS
  •   Nickel : UNS N02200, N02201
  •   Monel : UNS N04400, N05500, Alloy 20
  •   Inconel : UNS N06600, N06601, N006625, N08800, N08810, N08825
  •   Hastelloy : UNS N10276, N06022, N10665, N06455
  •  SMO 254 Grade UNS S31254
  • Aluminum – ASTM / ASME SB361 – 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
  • Titanium – ASTM / ASME SB363 – Gr1, Gr2, Gr5, Gr7, G9, Gr12, Gr23

TEST CERTIFICATE:

  •  Manufacturer test Certificate En 10204 3.1 & 3.2
  •  IBR Test Certificate Form IIIC
  • TPI Inspection release note (as per customer requirement)
GET AN ENQUIRY
Empower Your Journey with Enquiries.
Please enable JavaScript in your browser to complete this form.
Your Name
GET AN ENQUIRY
Empower Your Journey with Enquiries.
Please enable JavaScript in your browser to complete this form.
Your Name
Scroll to Top