TEE

equal-tee-bw-seamless-welded-500x500-1

TEE

Tee welding joints are generated when two sections overlap at a 90° angle, resulting in the edges of a plate or component coming together in the center to form a ‘T’ shape. Tee joints are a sort of fillet weld that can also be generated when a tube or pipe is welded to a base plate. To produce derivations on the main pipe, welded tees are employed. They are constructed from electrically welded pipes and, for higher diameters, plates. Fitting Service provides typical tees, which create a side deviation from the pipe while leaving the rest of the section unchanged. Because of the complicated load distribution, the tee branch connection is weakened. 

Emcor Engineering manufactures Welded Reducing Tees with branch outlets that are smaller than the run. Equal Tee and Equal Cross Fittings are available in a variety of sizes, making them perfect for space-constrained interconnects. Steel tee is a T-shaped pipe fitting with three branches that comes in two varieties: Equal Tee and Reducing Tee. Both are used to divide pipelines to alter flow rate and change direction. Emcor Engineering manufactures Welded Fittings Tee and supplies high quality Tee at the most competitive prices on the market. Welded Fittings Tee can only be used in conjunction with ASME Pipe.

CARBON STEEL SPECIFICATIONS:
  •  Size : 2″ to 80″NB , ANSI/ASME B 16.9
  •  Schedule : 10/20/40/80/100/120/160/XXS
  •  Carbon Steel : ASTM A 234 WPB, IS 1239 PART II
  •  Carbon Steel : DIN Standard – EN 10253-2 – P235TR2/P265TR2/P235GH/P265GH/P355N/P355NH
  •  Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE

 

ALLOY STEEL, & LTCS SPECIFICATIONS:
  •  Alloy Steel : ASTM A 234, WP5, WP9, WP11, WP12, WP91
  •  Low Temp. CS : ASTM A-420 WPL6
  •  Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE

 

STAINLESS STEEL SPECIFICATIONS:
  •  Size : 2″ to 80″NB, ANSI/ASME B 16.9
  •  Schedule : 10/20/40/80/100/120/160/XXS
  •  Stainless Steel : ASTM A 403 WP – TP                                             304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904L / XM19
  • Stainless Steel : DIN Standard EN 10253-4 / 10222-5 1.4301/1.4307/1.4401/1.4404/1.4529/1.4571/1.4541/1.4410/1.4550/1.4335/1.4539

 

 
DUPLEX STEEL & COPPER NICKEL SPECIFICATIONS:
  •  Size : 2″ to 48″NB , ANSI/ASME B 16.9, MSS-SP-75
  •  Schedule :10/20/40/80/100/120/160/XXS
  •  Duplex Steel : ASTM A815- UNS S31803, S32205, S32750, S32760
  •  Copper Nickel : C70600(90:10), C71500(70:30), C71640

 

NICKEL ALLOYS SPECIFICATIONS:
  •  Size : 2″ to 48″NB , ANSI/ASME B 16.9
  •  Schedule :10/20/40/80/100/120/160/XXS
  •   Nickel : UNS N02200, N02201
  •   Monel : UNS N04400, N05500, Alloy 20
  •   Inconel : UNS N06600, N06601, N006625, N08800, N08810, N08825
  •   Hastelloy : UNS N10276, N06022, N10665, N06455
  •  SMO 254 Grade UNS S31254
  • Aluminum – ASTM / ASME SB361 – 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
  • Titanium – ASTM / ASME SB363 – Gr1, Gr2, Gr5, Gr7, G9, Gr12, Gr23

TEST CERTIFICATE:

  •  Manufacturer test Certificate En 10204 3.1 & 3.2
  •  Radiography – 100% R.T. OK
  • TPI Inspection release note (as per customer requirement)
GET AN ENQUIRY
Empower Your Journey with Enquiries.
Please enable JavaScript in your browser to complete this form.
Your Name
GET AN ENQUIRY
Empower Your Journey with Enquiries.
Please enable JavaScript in your browser to complete this form.
Your Name
Scroll to Top